remote start 2000 jeep cherokee

Home / the12volt's Install Bay / Car Security and Convenience / remote start 2000 jeep cherokee (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tjbhoward

Member - Posts: 7

Joined: November 04, 2003

Location: United States

Posted: November 14, 2003 at 7:36 PM / IP Logged

I just installed an Audiovox remote start/ keyless entry on my 2000 jeep cherokee. The lock/unlock function works via remote but the reciever will not even recognize the "remote start" command via remote. Any suggestions? Thanks

cwagner17

Member - Posts: 27

Joined: October 30, 2003

Posted: November 15, 2003 at 12:59 PM / IP Logged

What Audiovox system did you install?

tjbhoward

Member - Posts: 7

Joined: November 04, 2003

Location: United States

Posted: November 15, 2003 at 3:32 PM / IP Logged

It was the Audiovox AARS-5CS Remote Start and Car Finder

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 15, 2003 at 5:35 PM / IP Logged

Did you program the tach as well as install the hood pin wire ? Does the Jeep even attempt to start ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

tjbhoward

Member - Posts: 7

Joined: November 04, 2003

Location: United States

Posted: November 15, 2003 at 7:10 PM / IP Logged

I broke the hood pin switch during install, but did connect to the positive on the underhood light. The tach wont program. The system acts like the control switch is off in both positions. ( It doesn't do anything at all when given the remote start command via remote.) Thanks for all the input so far.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: November 15, 2003 at 8:10 PM / IP Logged

audiovox have a switch thats need to be complete(plug in the switch). unlike DEI theres a initiate ground wire on the main harness, audiovox have this switch you need to plug in.

good luck, post your result....

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

tjbhoward

Member - Posts: 7

Joined: November 04, 2003

Location: United States

Posted: November 16, 2003 at 10:57 AM / IP Logged

I fixed it!! I was on the wrong hood light wire. Thanks for all the help.

tjbhoward

Member - Posts: 7

Joined: November 04, 2003

Location: United States

Posted: November 22, 2003 at 8:53 PM / IP Logged

I installed an audiovox remote start on a 2000 jeep cherokee and now something is draining the battery. Everything was working but the morning after the install the battery was dead and it wont hold a charge. Any ideas about what could cause this? Thanks

Tommy Howard

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: November 22, 2003 at 11:08 PM / IP Logged

Did you install an anti-grind relay?

How did you interface the doorlocks? databus interface module or relays?

What bypass module did you use if you have a gray key?

Did you power two devices using a single (-) out when running wire? You should always diode isolate the devices when doing so.

J Rilla

Owner/Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start 2000 jeep cherokee

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.