95 maxima, alarm/Remote starter

So this way i dont have to take out the entire factory system out? sorry this is stupid question but i'm really dont know about alarm? I already bought combo remote starter? what are step req.? thank you for your reply thank soo much have good day

I have 95 maxima with factory alarm. I just bought combo remote starter&alarm. I want to disable the factory  by taking off the fuse 7.5a and the alarm no longer use, but when i hook up the combo it's won't start replay from the module kicking in. can any one telling me what I should hook up ?here my manual from combo remote starter.

6-pin starter harness

PIN 1 RED WIRE A: MAIN POWER INPUTE A(+).CONNECT TO THE BATTERY OR CONSTANT POWER

PIN 2 RED WIRE B:MAIN POWER INPUT B(+) CONNECT TO THE BATTERY OR CONSTANT POWER

the one I didn't know where to hook up to

PIN 3 BROWN WIRE:second ignition output(+) .the brown wire provides 12v for a second ignition wire. this wire may instead be programmed for use as a second accessory or second starter wire.

PIN 4 ORANGE WIRE: accessory output(+) connect to the accessory wire coming from the ignition switch that supplies power to the heater/ac. some cards may have multiple accessory wires.

PIN 5: YELLOW WIRE: ignition output(+) connect to the main igniton wire that provides +12v when the ignition is on and while cranking the starter.

PIN 6 VIOLET WIRE: starter output(+) connect to the vehicle's starter wire

20-PIN MAIN HARNESS

PIN 1 GREEN / WHITE WIRE: BRAKE INPUT

PIN 2 BLACK/ GRAY WIRE: TACH INPUT

PIN 3 WHITE/ RED WIRE:AUCILLIARY 2 OUTPUT (-)500mA

PIN 4 BLACK/ WHITE WIRE: DOME LIGHT OUTPUT

PIN 5 YELLOW WIRE +12V IGNITION INPUT. THE YELLOW WIRE MUST CONNECT TO A MAIN IGNITION WIRE AT THE IGNITION HARNESS. THIS WIRE MUST SHOW 12 V WHEN THE IGNITION IS ON AND WHILE CRANKING THE STARTER.THE VOLTAGE MUST NOT DROP WHEN THE CAR IS STARTING.

PIN 6 BLUE / YELLOW WIRE:GLOW PLUG

PIN 7 BLUE/WHITE WIRE: PASSENGER UNLOCK OUTPUT

PIN8 BLUE/ORANGE WIRE:GROUND WHEN RUNNING OUTPUT (-)

PIN 9 BLACK : GROUND INPUT

PIN10 RED WIRE MODULE INPUT 12V+

PIN 11 VIOLET WIRE: POSITIVE DOOR INPUT

PIN12 GREEN WIRE: NEGATIVE DOOR INPUT

PIN 13 WHITE/ BLACK WIRE: HOOD PIN INPUT

PIN 14 ORANGE WIRE: ARMED OUTPUT

PIN 15 VIOLET/WHITE WIRE: FACTORY DISARM OUTPUT

PIN 16 WHITE/ VIOLET WIRE: FACTORY REARM OUTPUT

PIN17 BROWN WIRE: SIREN OUTPUT

PIN18 GRAY WIRE: AUXILLIARY 1 OUTPUT

PIN19 WHITE WIRE: PARKING LIGHT OUTPUT

PIN20 BROWN / WHITE WIRE: HORN OUTPut

Please help me because car not starting but the replay in the unit clicking. thank you

MODEL OARRXAM2000

This unit got 2 ignition output

Yellow ignition 1

brown ignition 2

any ones help me please!! i'm really newbie thank you for your help

I'm try to install combo remote starter but i have no luck this car have factory alarm on it. I just want to disconnect the factory period and install remote starter. how? when i try to start the car won't start the replay on the module click. any help thank you. do i need bypass somethings on this car?

Heres the info for your car.

1995-97 Nissan Maxima Alarm Information

Here is another diagram.

I suppose you could bypass the factory alarm all together by grounding the disarm wire or you could use a neg output from your unit if it has one available to disarm it which is what most installers do so they can retain the alarm. Be sure to observe the current capability of the unit and use a relay if you go the second route.

Do i need to bypass something on this car? I want stand alone with combo remote starter? I just want the factory alarm deactivate how? What are the trick to install on this car? someone already have experience with this car? I'm just first time install alarm on my car. I got all my diagram I try installed past weekend didn't work? car won't start but the relay clicking!! I dont know what i'm doing wrong ? thank you everyone for helping .