Ford F series alarm/remote start

I have 2 trucks, one issue with both, one issue sticks only to one. I have installed a compustar something or other on both of them. The users want to use their driver's priortity unlock on them. The Compustar unit has a provision for that having 2 unlock wires, one on first press of the button, then both on the second press of the button. I don't know how to wire it into the truck though, or if it's even possible. Maybe it's integral to the factory keyless and I can't do it. Can anyone help with this issue? The trucks are both 2003 King Ranch Fords, one F-150, the other F-350 super duty. The other issue is only on the F-350, I don't know where to tap for the wait-to-start light. All my sources have said hit a BLACK/ violet (if memory serves me correctly) in a 42 pin connector under the air cleaner. I think this must be specifically for the 7.3L diesel and doesn't apply to the new 6.0L diesel because there is no 42 pin connector underneath the air cleaner. Anyone know the solution? I tried to find a good source on the instrument cluster, that was a waste as the light is an LED. Thanks in advance. JR jr@jrssite.com

Thanks for the help, that makes perfect sense now with regard to the driver priority, why didn't I think of that. Question though, I'm most likely going to have to go into the door to get to the motor wire correct? They wouldn't have had to pull the motor wires outside to door for any reason. Is this correct? (I HATE going inside doors, especially the drivers door) Thanks again JR jr@jrssite.com

The VSM ( security module ) is to the right of the accelerator pedal above the transmission hump below the radio. ( Not accessible from radio opening ). Target wire is RED / orange for unlock motor wire. Test for polarity and set up relay for proper trigger. Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA