prostart ct 3100 remote starter diagram

The two thick red wires are the main power in.The thick yellow wire is the ignition. The thick orange wire is the accessory wire(heater). The purple wire is the starter wire. If it has a thick green wire that is the selectable onboard high current relay. You can select it for 2nd ignition, acc., or starter.The black wire is ground. The smaller orange wire is for the switched side of the brake switch. The thinner yellow wire is the + parking lights. The thinner purple wire is for tach and the grey wire is for the hood pin. The thin green wire is negative unlock, the brown is negative lock. The blue is the second channel (-). If there is a WHITE/ brown this is the rearm wire. The WHITE/ green is the disarm wire. The solid white wire is usually the negative out when running wire. If this doesn't match I'm sorry as I am doing it from memory.sparky

hi if you go to http://206.47.191.115/prostart.nsf/en/Support2 you can download a install manual from there sitegood luck

kirk

Thanks very much for the info and link.Do it right the first time, only a doctor can bury his mistakes.