install prestige aps785 in 99 expedition

Home / the12volt's Install Bay / Car Security and Convenience / install prestige aps785 in 99 expedition (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

andrewzucker

Member - Posts: 3

Joined: December 25, 2003

Location: United States

Posted: December 25, 2003 at 6:46 PM / IP Logged

I'm going to try to install my first remote start / car alarm tomorrow and I have a few questions. I read through the instructions and everythig seemed straight forward until I came across the wiring of the aux output harness. this ahrness is used to control the factory alarm. the first wire is a pulsed ground output before start and is used to disarm the factory alarm. Up until reading this I assumed that I would need to uninstall the factory anti-theft system. Can someone please explain what I need to do with respect to the factory alarm. Thanks for the help.

-Andrew

Back to Top

Basscoholic23

Copper - Posts: 67

Joined: June 11, 2003

Posted: December 25, 2003 at 7:35 PM / IP Logged

Does the factory alarm/Keyless entry have Trunk release on the factory remote?

Back to Top

Basscoholic23

Copper - Posts: 67

Joined: June 11, 2003

Posted: December 25, 2003 at 7:38 PM / IP Logged

If it does all your wiring are in the passengers kick panel ,exept for the immobilizer wiring.

Back to Top

andrewzucker

Member - Posts: 3

Joined: December 25, 2003

Location: United States

Posted: December 25, 2003 at 7:39 PM / IP Logged

No it doesn't. It just has lock, unlock and panic.

I've been thinking about the alarm for a bit now and my understanding is simply that the alarm is controlled through the power locks. If the car is locked or unlocked with the ignition off the alarm will arm or disarm. Is this correct or am I way off.

-Andrew

Back to Top

Basscoholic23

Copper - Posts: 67

Joined: June 11, 2003

Posted: December 25, 2003 at 7:48 PM / IP Logged

Does your expo have a bliking light in the center of your top dash?if it does the door locks do control the factory alarm.

Back to Top

Basscoholic23

Copper - Posts: 67

Joined: June 11, 2003

Posted: December 25, 2003 at 7:53 PM / IP Logged

my bad for confusing you .Your explorer has keyless entry only.Your right about the door locks install prestige aps785 in 99 expedition -- posted image.

Back to Top

andrewzucker

Member - Posts: 3

Joined: December 25, 2003

Location: United States

Posted: December 25, 2003 at 8:15 PM / IP Logged

No worries. It's actually an Expedition but I'm assuming that makes no difference. No blinking light. Thanks for the help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

install prestige aps785 in 99 expedition

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.