ProStart 5060 Installation question

Home / the12volt's Install Bay / Car Security and Convenience / ProStart 5060 Installation question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

richardfinnie

Member - Posts: 1

Joined: December 26, 2003

Location: Canada

Posted: December 26, 2003 at 12:27 PM / IP Logged

Hi

I am having serious problems installing my ProStart 5060 alarm/command start combo. When I try to put the unit into program mode, it won't stay in program mode. For example, using the valet switch I can get the unit in and out of valet mode then using the hood pin I can get the parking lights to stay on for the 20 sec. duration. After that though, it asks to turn the vehicle on and off and the LED will start flashing, but mine starts flashing when the parking lights are on, but once I turn the vehicle off it stops. Any ideas from anyone who is familar with this model? Any help would be appreciated. Thanks

Rick

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 26, 2003 at 4:57 PM / IP Logged

hi if your in edmonton pm me and ill give your my phone number and try and help you ive put a few of those in. if you dont mind the long distanche call anyways

good luck

kirk

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ProStart 5060 Installation question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.