viper 791xv wire diagram

Home / the12volt's Install Bay / Car Security and Convenience / viper 791xv wire diagram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: December 26, 2003 at 10:20 PM / IP Logged

viper 791xv wire diagram:

at the relay satellite (here on the last page), there is the 4 pin harness and my question is that purple starter wire. is that the second starter output or something else? there is no description or other info on this harness.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

tomberndt

Member - Posts: 8

Joined: January 02, 2004

Location: United States

Posted: January 02, 2004 at 11:13 PM / IP Logged

that small purple wire is a negative output in comparison to the larger positive output. You can either loop the purple side to the second starter or use a relay to activate both starter wires.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791xv wire diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.