dei alarm pager question

Home / the12volt's Install Bay / Car Security and Convenience / dei alarm pager question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lak8

Member - Posts: 21

Joined: December 26, 2003

Posted: December 28, 2003 at 11:06 PM / IP Logged

Hi, I bought a python 880xp alarm system (same as vipers 790vx). Installation went great thanks to the help from this site:).

My question is for the lcd pager remote. Im not sure if its suppost to do this or not but i keep getting the "Receive Indicator" blinking on the pager about every 5secs. The only thing it says in the book about this is "the receive icon will be displayed while the remote control is transmitting a command to the vehicle"

Is this suppost to do this, if so why and what does it mean? Any suggestion about if this feature should be on or not would be helpful aswell

Thanks

Back to Top

rudbwoy69camaro

Silver - Posts: 350

This member has made a donation to the12volt.com. Click here for more info.

Joined: June 10, 2003

Location: United States

Posted: December 29, 2003 at 4:28 AM / IP Logged

From the RS3 owners manual.(same for all DEI transponder alarms)programmable remote control features

To enter programming mode

Press and hold all four remote control buttons simultaneously until

one long beep is heard. Programming Mode has now been entered.

Page Mode On/Off

After entering Programming Mode, press " * " within fiveseconds to toggle on and off. When the Page Mode is on, theremote control will wake up periodically to check for messagesfrom the security module. It will also wake up when any buttonis pushed. When Page Mode is off, the remote control "sleeps"until a button is pushed, extending the life of the battery.

It's recieving "updates" from the car/alarm brain. Does what it says in the manual...

Back to Top

Search for other posts by rudbwoy69camaro

lak8

Member - Posts: 21

Joined: December 26, 2003

Posted: December 29, 2003 at 7:08 AM / IP Logged

Ive read that but i didnt think that was what the flashing icon ment. Thanks

Do you think i should keep this on or off. If i turn it off will my remote page me if some one trys to break into my car or warm me. Im just wonder if this is what the future does or does it just check the states of the car and sees if every thing is ok every 5secs.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei alarm pager question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.