98 Accord EX factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / 98 Accord EX factory alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dakest

Member - Posts: 10

Joined: January 05, 2004

Location: United States

Posted: January 08, 2004 at 11:37 PM / IP Logged

This my first time here, I need to know how to add a starter kill, a glass/shock sensor and a siren instead of the horn in a 98 Accord EX V6 factory alarm.

I like to know where the module is and the wires coming out of it.

Thanks!!

evolutionoftym

Member - Posts: 39

Joined: January 06, 2004

Location: United States

Posted: January 09, 2004 at 12:56 AM / IP Logged

it should be in the upper left hand side of the drivers side dash just above the DKP....

Search for other posts by evolutionoftym

dakest

Member - Posts: 10

Joined: January 05, 2004

Location: United States

Posted: January 09, 2004 at 2:06 AM / IP Logged

I appreciate it, really, Is what I am trying to do could be done? or should I be better off with a aftermarket unit.

I have a Crime Guard 533i ,are they decent? and do you know the colors of the wires coming from the module and what they do?

damn!!! I am asking to many question too fast, sorry

dakest

Member - Posts: 10

Joined: January 05, 2004

Location: United States

Posted: January 12, 2004 at 3:44 PM / IP Logged

Anybody wants to help? I can' find the alarm module, what does it look like, can it be disabled?

I would reeeally appreciated pleeease!

dakest

Member - Posts: 10

Joined: January 05, 2004

Location: United States

Posted: January 13, 2004 at 12:07 AM / IP Logged

I am trying to find the factory alarm module in my 98 Accord EX V6 and the pinout or wire color/id coming from the module.

Please!! thanks in advance.

serialthrlla

Copper - Posts: 57

Joined: December 23, 2003

Location: United States

Posted: January 13, 2004 at 12:53 AM / IP Logged

on the ex models the fact. alarm arms and disarms with the locks. I would just add an aftermarket and call it a day. I imagine bypassing the factory system would be difficult

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 13, 2004 at 6:03 AM / IP Logged

if you are hooking up an alarm try this info:

Make: Honda

Model: Accord

Year: 1998

This Database Was Last Updated On: 6/9/2003

Index #: 5620

Alarm

Constant 12 volts WHITE IGNITION SWITCH HARNESS

Ignition 12 volts BLACK / YELLOW IGNITION SWITCH HARNESS

Starter BLACK/ WHITE IGNITION SWITCH HARNESS *

Dome Light BLACK/ WHITE (-) 4 PIN GREEN CONN. IN PASS. FUSE BOX

Trunk Pin Switch ORANGE (-) 18 PIN GRAY CONN. IN DR. KICK PANEL

Parking Lamp RED / BLACK (+) AT FUSE BLOCK ON DRIVERS SIDE

Power Lock BLACK/ WHITE 2 PIN GRAY CONNECTOR #201

Power Unlock GREEN/ RED IN DRIVER KICK PANEL(SEE TECH ON EX)

* Installing A Starter Kill Relay At The Ignition Switch Harness Before The Starter Wire Enters The Driver Side Fuse Block May Cause A "Check Engine" Light To Come On. Starter Wire Should Be Accessed After Fuse Block. #201 - See Negative Pulse Door Lock Diagram.

Remote Start

Tach Signal BLUE AT TACH TEST CONNECTOR * #239

Ignition #2 YELLOW IGNITION SWITCH HARNESS

Ignition #3 N/A

Accessory WHITE/ BLACK IGNITION SWITCH HARNESS

Neutral Safety BLUE/WHITE (-) AT POWERTRAIN CONTROL MODULE **

Brake Light WHITE/ BLACK (+) AT SWITCH ABOVE BRAKE PEDAL

Reverse Light GREEN/ BLACK (+) AT FUSE BLOCK ON BEHIND DRIVERS DASH

Rear Window Defrost N/A

* 4 Cylinder Tach Test Connector (2 Pin White Connector) Is Located On Pass. Side Of Engine Compartment Next To Battery. 6 Cylinder Tach Test Connector (2 Pin White Connector) Is Located On Dr Rear Of Engine Compartment. ** Powertrain Control Module Is Located Behind The Right Side Of The Center Console Behind The Passenger Dash. #239 - See Immobilizer Bypass Diagram See Tech Notes!!!

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 Accord EX factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.