Manual 2002 Eclipse, Remote Starter

Home / the12volt's Install Bay / Car Security and Convenience / Manual 2002 Eclipse, Remote Starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

lukeforce

Member - Posts: 38

Joined: December 11, 2003

Location: United States

Posted: January 16, 2004 at 10:11 PM / IP Logged

I used the J-PATS Key Transponder. Installed it at the garage, forgot my spare key, Used my reg. key to make sure its all right, got back home, put spare key in transponder, now it doesnt start up engine...

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 16, 2004 at 10:11 PM / IP Logged

Try this p71-cruiser........ use the clutch bypass you have and activate it ( with the truck in gear ) and then with you in the truck, crank the starter for the duration that the remote starter would. Now do that 3 times in a row and see how far the truck goes because most systems out on the market are programmed for 3 tries before it stops. Just go and spend the extra 50 - 80 bucks and get a proper manual safe starter and be done with it.... end of story .

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 16, 2004 at 10:13 PM / IP Logged

p71, if you want to test your ebrake, try to remote start the vehicle with it in gear, that would be the only way to really see what will happen. My guess is that the car will never actually turn over, but instead just keep cranking until it stops trying, then it will try again, and then a third time.

I am amazed that so many people have enough confidence in themselves to simply say they wont ever leave it in gear, and that is safe.

J Rilla

Owner/Installer

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 16, 2004 at 10:15 PM / IP Logged

lukeforce, the positioning of the key in the module is very important and moving it around can offset the " sweet spot " of the key where the module reads the signal off the key. Try to reposition the key in the module and try to start again with the remote starter.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

lukeforce

Member - Posts: 38

Joined: December 11, 2003

Location: United States

Posted: January 16, 2004 at 10:42 PM / IP Logged

SWEET!!!!!!. I went out, repositioned the key and-BAM!!! Now Its all good!! I want to say THANK YOU SO MUCH for all the help provided by everyone

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 16, 2004 at 10:51 PM / IP Logged

No problemo. Keep warm with that newly installed remote starter and feel proud that you did it

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

lukeforce

Member - Posts: 38

Joined: December 11, 2003

Location: United States

Posted: January 16, 2004 at 10:58 PM / IP Logged

One last question, I want to make my sunroof vent, open,and close. Right now my windows do, but i want my sunroof to as well. My sunroof has a tilt, one-touch open, and close. I have a 2 windows up and down, module. What would be the way to hook this badboy up...?

p71-cruiser

Member - Posts: 47

Joined: January 07, 2004

Location: United States

Posted: January 17, 2004 at 1:12 AM / IP Logged

jrilla wrote:

I am amazed that so many people have enough confidence in themselves to simply say they wont ever leave it in gear, and that is safe.

Think about this IF I ever leave the truck in gear the first time the RS tries to start in gear just hit the RS transmitter again and guess what the remote starter is off!

P71-CRUISER

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 17, 2004 at 8:21 AM / IP Logged

Think about this IF I ever leave the truck in gear the first time the RS tries to start in gear just hit the RS transmitter again and guess what the remote starter is off!

P71-CRUISER

That's IF you are always around to see the truck start. P71-CRUISER................ try the scenario that jrilla and I posted and see how far the truck jumps on just one attempt of the remote starter. You would have to make sure that you are always parked with no one in front of you and that you are not in front of a shop or a building.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

lukeforce

Member - Posts: 38

Joined: December 11, 2003

Location: United States

Posted: January 17, 2004 at 10:56 AM / IP Logged

lukeforce wrote:

Anyone...????

Also, My girls got the Avital, Avistart 4100 She wants it to run for 24 mins upon starting. Is it the simple twist of the knob . If so , which way and how far? Thanks guys....

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.