wires for the remote starter 97 range rvr

Notes I got say [WHITE/ red] (-) Ign Switch This car's a bitch because all ignition, acc, and start wires are (-) so they all need to be inverted.

It's not an easy car... If I remember it's 5 wire for door locks, (-) parking lights, (-) ign, start, and acc wires. If you have lots of time and patience I would say go ahead. Beyond just those doors and ign switch, it's pretty easy because everything can be found at the BCM. And if it has a factory alarm, then you would pulse the alarm wire and the lock wire at the same time. To unlock, pulse the disarm wire and unlock wire at the same time. IF it's for your personal veichle, then by all means go ahead. Let me tell you my first one is pretty frustrating because all the alarm's outputs are + so you need at least 3 relays for the ign switch. But there's no bypass of any kind so if you can overcome the ign switch, and the door locks, it's a piece of cake. But you may need up to 5 relays to do it all.

actually the arm/disarm wire is the same wire. Just pulse the unlock or lock wire to disarm or arm