amp question

Home / the12volt's Install Bay / Car Audio / amp question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Xtremesize1978

Member - Posts: 27

Joined: July 29, 2002

Location: United States

Posted: January 13, 2004 at 5:36 PM / IP Logged

I've got an amp. that the power light is blinking and the subs are pulseing noise. Why is this happening

Search for other posts by Xtremesize1978

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: January 13, 2004 at 8:41 PM / IP Logged

Sounds like you may have blowen your amp. Check your power and ground, make sure you have 12+v at the amp. Check that the trig wire is working. Dissconnect the subs, if amp turns on, if amp turns on you may have a cooked sub, or too low impedence for the amp.

superstreet786

Silver - Posts: 339

Joined: August 12, 2003

Location: United States

Posted: March 14, 2004 at 9:05 PM / IP Logged

I think your power supply is bad

---- 1996 Chevy S10 ----

1 Lightning Audio S2.600.2 Amp

2 Lightning Audio 12" Subs

1 Lightning Audio 1 Farad Cap

Search for other posts by superstreet786

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.