CliffNet Wizard not working?

Home / the12volt's Install Bay / Car Security and Convenience / CliffNet Wizard not working? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

xboxfire

Member - Posts: 4

Joined: March 24, 2004

Location: United States

Posted: March 24, 2004 at 8:55 PM / IP Logged

I'm having the same problem! I downloaded the program from cliffards website, so I'm not sure if that could be the reason it freezes up. using it with the intelliguard 850. It shows a information bar that states that my alarm is disarmed and that my ignition is off and if i arm it, it says that the alarm is armed and to disarm it to continue so I know that the cord is conected properly. When I press continue it freezes. PLEASE HELP! It says that the program is the 2.10

xboxfire

Member - Posts: 4

Joined: March 24, 2004

Location: United States

Posted: March 24, 2004 at 8:57 PM / IP Logged

Cav3Kim

Member - Posts: 16

Joined: April 07, 2004

Location: United Kingdom

Posted: April 07, 2004 at 8:19 AM / IP Logged

what are you connecting it to on your laptop?

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: April 07, 2004 at 10:02 AM / IP Logged

Defective cable? Wrong Com Port? Com port conflict - being used by something else?

Prepare your future. It wasn't the lack of stones that killed the stone age.

flylife2k

Member - Posts: 4

Joined: April 19, 2004

Posted: April 19, 2004 at 5:30 PM / IP Logged

Any advancements on this problem?? Iv got the same problem.................

cgeoff1

Member - Posts: 13

Joined: May 09, 2002

Posted: April 19, 2004 at 5:55 PM / IP Logged

I use Cliffnet wizard pro with Windows ME and it works great. no problems! (got it on e-bay)

syko

Member - Posts: 5

Joined: March 23, 2004

Location: United Kingdom

Posted: April 20, 2004 at 2:16 AM / IP Logged

I've just fitted the avantguard g5 and used the clifnet wizard on windows nt no problems,

chasesaccessori

Copper - Posts: 198

Joined: August 22, 2002

Location: United States

Posted: April 20, 2004 at 11:03 AM / IP Logged

Sooo many problems with Clifford since DEI took it over! What a shame!

(owner/installer)

Chase's Accessories

Ridgecrest, CA

in business since 92

Search for other posts by chasesaccessori

flylife2k

Member - Posts: 4

Joined: April 19, 2004

Posted: April 20, 2004 at 12:45 PM / IP Logged

Shame, quite a few ppl have had this problem. There has to be a solution somewhere!

Cav3Kim

Member - Posts: 16

Joined: April 07, 2004

Location: United Kingdom

Posted: May 12, 2004 at 12:06 PM / IP Logged

the problem is caused by incompatible serial ports, usually due to a converter being used or a poor driver.

I was trying to use mine through a USB port and converter cable with "prolific" software driver and it wouldn't have any of it, I bought a hardware com port and it worked first time.

Richard

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.