trc xr33 alarm wiring help

Home / the12volt's Install Bay / Car Security and Convenience / trc xr33 alarm wiring help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

showtime

Member - Posts: 15

Joined: January 05, 2003

Location: United States

Posted: January 19, 2004 at 9:39 PM / IP Logged

i need to know where i connect the - neg when arm & running wire.the - neg door trigger input.the spark plug input signal and finally the parking light input+/- wire

for a 02 ford explorer.

abright52

Copper - Posts: 137

Joined: September 25, 2002

Location: United States

Posted: January 20, 2004 at 4:06 AM / IP Logged

-Neg when running should go to your Bypass Module (usually a brown wire)

-Neg door trigger input should connect to the door in some way so that when the door is opened the alarm is triggered. This can usually be connected to the dome light.

-Parking light wire can usually be found at the parking light switch, not sure on the color I don't have a diagram for that new of an Explorer

-Spark plug input I am not sure on, posssibly for the tach wire?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trc xr33 alarm wiring help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.