95 explorer, viper 791 xv

Home / the12volt's Install Bay / Car Security and Convenience / 95 explorer, viper 791 xv (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 22, 2004 at 11:00 PM / IP Logged

i'm installing the new viper 791 xv in a 95 explorer. i'm new to alarm installation. so if anyone has any information and/or tips they could could give to help me out along the way

joebizz

Member - Posts: 20

Joined: January 15, 2004

Location: United States

Posted: January 23, 2004 at 12:13 AM / IP Logged

I just put it in my infiniti, its awesome.. sorry i have no tech info on that car.

Basscoholic23

Copper - Posts: 67

Joined: June 11, 2003

Posted: January 23, 2004 at 12:28 AM / IP Logged

constant -Yellow (2)

Ingnition1-light GREEN/ purple

Ignition 2-gray / YELLOW

Ignition 3-gray / YELLOW

Starter-RED / light blue

Accesorries-BLACK/ light green

Brake-light green -above brake pedal

Parking lights-brown (+) -below kick panel

Door trigger-BLACK/ blue -(+)below kick panel

Tach-tan / YELLOW- At ICM in front of engine compartment

lock-pink / YELLOW (-) below kick panel

unlock-pink/light green (-) below kick panel

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 24, 2004 at 8:13 AM / IP Logged

there is a four pin harness that attaches to the relay satalite and i can't locate the description of these wires in the manual and have no clue what they are. does anyone know what they are and hook to. thanks

joebizz

Member - Posts: 20

Joined: January 15, 2004

Location: United States

Posted: January 24, 2004 at 8:23 AM / IP Logged

look at the last page, the description is there....

Blue (-) Status Output

Orange (-) 200mA 2nd acessory output

Purple (-) 200mA starter output

Pink (-) 200mA 3rd Ignition output

Good luck dude!

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 24, 2004 at 2:24 PM / IP Logged

does anyone know where and what color the dome light wire is

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 24, 2004 at 2:26 PM / IP Logged

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 24, 2004 at 6:25 PM / IP Logged

i'm haveing a problem figuring out what the WHITE/ blue remote start (-) activation input hooks up to. could some one please explaine this to me

thanks

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 24, 2004 at 9:12 PM / IP Logged

can anyone help me with this???

advanced529

Member - Posts: 16

Joined: January 20, 2004

Location: United States

Posted: January 24, 2004 at 9:47 PM / IP Logged

The WHITE/ blue wire can be hooked up to a momentary switch to activate the alarm by pressing it one to three times depending on the the programming of the alarm.. It carries the same function of the remote start button on the remote.. Not Necessary..

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.