91 Integra, Python 460HP

Home / the12volt's Install Bay / Car Security and Convenience / 91 Integra, Python 460HP (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tribb333

Member - Posts: 5

Joined: January 17, 2004

Location: United States

Posted: January 23, 2004 at 6:12 PM / IP Logged

Hi, I recently had the python 460hp alarm installed in my 91 integra. I think it's a great alarm, other than the fact that when it goes off, i cant seem to shut it off with the remote, i have to wait for it to finish. I was curious if anybody else has had this issue, and if i am even able to change that, or if its just the way that this particular alarm is set up. Any help would be appreciated. Thanks.

advanced529

Member - Posts: 16

Joined: January 20, 2004

Location: United States

Posted: January 23, 2004 at 9:30 PM / IP Logged

Almost all the times that I had problem with disarming while alarm was sounding ,,,, was always a grounding issue with the alarm brain.. Have your installer check out the problem,, he probably has an insufficient ground for the brain..

Good luck J

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

91 Integra, Python 460HP

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.