95 4 Runner wiring

Home / the12volt's Install Bay / General Discussion / 95 4 Runner wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ha10311

Member - Posts: 3

Joined: August 05, 2002

Location: Canada

Posted: August 06, 2002 at 12:10 AM / IP Logged

Can someone point me in the right direction please ? I'm trying to wire a Clarion CD player into a 4 runner. I've got sound in the fronts, but cannot for the life of me get sound in the rears. I thought by using an add on wiring harness the job would be a cinch. Do the rear speakers have a built in amp of some sort, if so, could my trouble be in the remote turn on wire in the plug/ harness.

Samantha

Member - Posts: 32

Joined: July 09, 2002

Location: Australia

Posted: August 06, 2002 at 6:19 AM / IP Logged

I think the harness that you are using has two remote lines on it but the clarion deck only has one, find out which one is putting out power and join the other one onto it, make sure you disconnect the one that isn't used from the deck. Let me know how you go.

Sam

caraudioshopbm

Member - Posts: 25

Joined: April 16, 2002

Location: United States

Posted: August 06, 2002 at 2:10 PM / IP Logged

Is there one or two wire harnesses plugged into the back of the factory head unit?

4 guys 1 shop & we know r sh*t

Search for other posts by caraudioshopbm

ha10311

Member - Posts: 3

Joined: August 05, 2002

Location: Canada

Posted: August 06, 2002 at 6:19 PM / IP Logged

There are two harnesses to the factory head unit. It sems to be in the remote lead. I don't understand though why the remote is hooked up, if there is no amp or anything hooked up to the new deck ?

Samantha

Member - Posts: 32

Joined: July 09, 2002

Location: Australia

Posted: August 07, 2002 at 5:25 AM / IP Logged

I think that the back speakers are amplified. The speaker wires for the rear are on the smaller of the two plugs and I'm pretty sure that the amps for the speakers are built into the rear speaker enclosures.

Sam

ha10311

Member - Posts: 3

Joined: August 05, 2002

Location: Canada

Posted: August 07, 2002 at 12:12 PM / IP Logged

The rear speakers are amplified, I spoke to a Toyota tech today. The remote pins on the aftermarket plug are jumper wired together, as there is two remote on the factory harness. Connecting the remote off the stock plug to the aftermarket remote line, and boom, just like that the rear speakers work fine. This little job has sure made me a little smarter. Thanks all for your help !!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 4 Runner wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.