2000 volkswagon jetta window rollup

Home / the12volt's Install Bay / Car Security and Convenience / 2000 volkswagon jetta window rollup (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 29, 2004 at 3:46 PM / IP Logged

What is the best way to roll these windows up i know if i extend the pulse on the door lock wires the windows will go up but do i use a pulse timer or what?? I need the best way to do it!

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 29, 2004 at 9:32 PM / IP Logged

any ideas anyone??

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 30, 2004 at 10:11 AM / IP Logged

someone throw an idea, I need to do this remote start in a few hours!

nasdaqbull

Member - Posts: 3

Joined: January 30, 2004

Location: Canada

Posted: January 30, 2004 at 10:42 AM / IP Logged

I'm not an installer so I can't really help you. I imagine you would either need a timer or some pressure sensor to stop rolling the windows up when they reach the top. I know they have window roll-up modules that do this and they integrate pretty easily.

Sorry I couldn't be more help but good luck.

nasdaqbull.

nasdaqbull

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 30, 2004 at 10:45 AM / IP Logged

no window module needed in this car, but i was thinking maybe a pulse timer!! This car rolls up window through door lock wires it is multiplexed

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 30, 2004 at 11:00 AM / IP Logged

Thanks nasdaq though I apreciate the post!

Dolomite

Member - Posts: 12

Joined: December 01, 2003

Location: United States

Posted: January 30, 2004 at 11:59 AM / IP Logged

You could use a capacitor and a relay to create a delayed pulse for as long a duration as you need.

Patel

Copper - Posts: 86

Joined: October 20, 2002

Location: Canada

Posted: January 30, 2004 at 2:58 PM / IP Logged

need a 20 second pulse timer to close the 4 windows then the sunroof, in the cars lock wire (be sure to diode isolate

you can use the lock wire to trigger or an aux channel

u can do the same for window roll down on a separate channel of course

no need for a pressure sensor, the car has them built in

Patel

Copper - Posts: 86

Joined: October 20, 2002

Location: Canada

Posted: January 30, 2004 at 2:58 PM / IP Logged

srry 15 sec timer

kwalton

Member - Posts: 28

Joined: January 23, 2004

Location: United States

Posted: January 31, 2004 at 10:02 PM / IP Logged

the best way to do them is through a validity output from the alarm. that way they will only work as long as you are pressing the button.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.