nissan quest '96 remote starter problem

Home / the12volt's Install Bay / Car Security and Convenience / nissan quest '96 remote starter problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

UncleJohnzy

Member - Posts: 16

Joined: October 29, 2003

Location: United States

Posted: January 29, 2004 at 11:11 PM / IP Logged

Hi everyone!

I need help if someone can spot out the problem here,. .. on the nissan quest '96, I install a commando 5005 not long ago, everything seems to work fine 'til recently, .... the car won;t start with either the remote or KEY... So I thought it 's the starter moter went bad, have it check out and is noting wrong,,,,, So I remove the unit and it still won't start with the KEY,,,, then I cut up almost all wires,,, then it started ok with the KEY,,,, any idea,,,, Helps are appreciated...

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: January 29, 2004 at 11:26 PM / IP Logged

did ya check all your wiring for the car?

when you say cut most of the wires you mean the wires from the RS?

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

UncleJohnzy

Member - Posts: 16

Joined: October 29, 2003

Location: United States

Posted: January 29, 2004 at 11:29 PM / IP Logged

didn't check them wires yet, and yes, cut some wires from the rs

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: January 29, 2004 at 11:34 PM / IP Logged

like the ignition wires? if you you may have to diode isolate them. here is the diagram that i have

NISSAN QUEST 1996-98
WIRE	COLORS	LOCATION
12 VOLTS CONSTANT	WHT/PUR	IGN HARNESS
IGNITION 1	BRN	IGN HARNESS
IGNITION 2	N/A	IGN HARNESS
IGNITION 3	IGN HARNESS
ACCESSORY /HEATER BLOWER 1	WHT/GRN	IGN HARNESS
ACCESSORY /HEATER BLOWER 2
STARTER	RED & RED / GRN	IGN HARNESS
PARKING LIGHTS	ORG/BLK	AT HEADLIGHT SWITCH
DOMELIGHT	BLU	AT SMART ENTRY CON TIMER
PWR DOOR LOCK	GRN/ORG	16 PIN CONN HIGH IN DR KICK
PWR DOOR UNLOCK	GRN/WHT	16 PIN CONN HIGH IN DR KICK (TYPE B)
TRUNK RELEASE
TACH SENSOR	GRN/WHT	PIN 3 ON ENG CONT MOD
BRAKE	YEL/BLK	AT SWITCH ABOVE BRAKE PEDAL
HORN	YEL (-)	STEERING COLM
FACTORY DISARM	RED / BLK	DRV KICK PANEL

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

UncleJohnzy

Member - Posts: 16

Joined: October 29, 2003

Location: United States

Posted: January 29, 2004 at 11:39 PM / IP Logged

What do you mean by diode them?

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: January 29, 2004 at 11:42 PM / IP Logged

diode isolate means to put and isolator in the way for the current...kinda like a 1 way valve so that it does not back feed to the RS or car. I had to do this on a 04 town and country cause it keep sending 300ma to the start wire and woudl nto RS. here is the link for ya

https://www.the12volt.com/diodes/diodes.asp

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

UncleJohnzy

Member - Posts: 16

Joined: October 29, 2003

Location: United States

Posted: January 29, 2004 at 11:48 PM / IP Logged

I know what you mean now and no i didn't install with diode... and could the diode solve the problem with unable to start... I mean it work fine before that

thanx

UncleJohnzy

Member - Posts: 16

Joined: October 29, 2003

Location: United States

Posted: January 30, 2004 at 12:46 AM / IP Logged

bmf1000d,,,, any other input??? anyone?

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 30, 2004 at 9:08 AM / IP Logged

Did you have a starter kill relay installed?

J Rilla

Owner/Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

nissan quest '96 remote starter problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.