Hiss! Noise Problem

Home / the12volt's Install Bay / Car Audio / Hiss! Noise Problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: January 30, 2004 at 11:21 AM / IP Logged

HI, Guys , Im having problem with some noise coming through my speakers, Even with the volume at 0 you can hear kind of loud the Hiss... I have a pioneer Premier deh-p840mp and a Pioneer deq-9200 EQ. and I have ground it to the Chasis, not to the wire coming from the harness/.. What could be the problem, or could i do to solve it...

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: January 30, 2004 at 11:25 AM / IP Logged

Oh, I forgot to tell you, I know where is coming from, I just got the Pioneer Premier DEW-9200 EQ< and If I bypass the eq connect just to the hu, no noise, no hess at all, but is there any way i can do something to the eq to keep using because i just bought it less than i month and i spent like US$330.00

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: January 30, 2004 at 11:36 AM / IP Logged

The DEQ-9200 is a very sophisitcated unit but it is also known for being noisy. If you have a gain mis-match it will introduce unacceptable levels of high frequency hiss. Are you in "pro" or "standrad" mode? I suggest you put it into standard more and go through the setup calibration procedure (as detailed in the owners manual) again to ensure your levels are correct. If set up correctly, this unit can be great. If set up incorrectly, this unit can destroy the sound of your system.

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: January 30, 2004 at 11:38 AM / IP Logged

IM using it in Pro Mode, I have two amp (bazooka) going to my bass and One amp (soundstream) going to my mids and high.... I will try doing that now to see what happens,, I will post the results..

thank you

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: January 30, 2004 at 11:40 AM / IP Logged

Its kind of hard to Set the EQ the way you want, its complicated to use, TO have to read the WHole mannual and im not good reading mannuals,,, but I will take the time to do if I really want my system to sound the way i want it..

thank you

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: January 30, 2004 at 1:26 PM / IP Logged

Both in Pro mode or Std, mode i still hearing the hiss, but I change some setting in the Pro mode and It reduce the hiss, so now I think the hiss is normal... .......

I was told this Eq was known for being noise before i bought,

but now its fine....

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: January 30, 2004 at 3:43 PM / IP Logged

try adjusting your high level controls on your head unit to 0 if you have any adjustments before the eq it could cause distortion or hissing

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hiss! Noise Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.