fg on plastic door panel

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / fg on plastic door panel (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

beyondamfm

Copper - Posts: 105

Joined: January 12, 2004

Location: Missouri, United States

Posted: February 11, 2004 at 12:24 PM / IP Logged

I was wondering what kind of tricks you guysare using to make fiberglass/resin stick on plastics. just curious. thanks

The Clear Bra Guy

KCs premiere paint protection guru

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 11, 2004 at 2:13 PM / IP Logged

Rough up the surface of the plastic and drill holes ( small holes ) so that the resin runs into these holes . This will allow the project to grab into the mold of the door better. Another way to do it is to have tabs or panel connectors fiberglassed into the project and then drill out the hole where they will fit into the plastic.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fg on plastic door panel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.