neon daytime running lights

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / neon daytime running lights (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

peter884

Member - Posts: 8

Joined: February 06, 2004

Location: Canada

Posted: February 12, 2004 at 9:57 AM / IP Logged

im trying to disconect my factory daytime running lights on a 2000 neon and theres no fuse for just the running lights any suggestions.

thanks

peter

Back to Top

S.I.Autosports

Copper - Posts: 98

Joined: September 30, 2003

Location: United States

Posted: February 13, 2004 at 4:57 AM / IP Logged

There should be a resistor under the hood some where. You might unplug it and see if that does it. Im not sure where it is located on that car. Can i ask why you want them disconected?

Back to Top

Search for other posts by S.I.Autosports

peter884

Member - Posts: 8

Joined: February 06, 2004

Location: Canada

Posted: February 13, 2004 at 7:00 AM / IP Logged

i've got a better set so i only want the factory ones for blinkers and markers i'll try to find the resistor thanks

peter

Back to Top

peter884

Member - Posts: 8

Joined: February 06, 2004

Location: Canada

Posted: February 16, 2004 at 12:16 PM / IP Logged

I found one resister that shut them off but it also runs my fuel pump i dont know if there is a way around that or not without rewiring the fuel pump i would rather not go that way just for driving lights if you have any other suggestions they would be more than welcome thanks

peter

Back to Top

Neo2Neo

Member - Posts: 5

Joined: March 03, 2004

Location: Ireland

Posted: March 03, 2004 at 10:33 PM / IP Logged

You could try and take out the bulbs! (i guess there is 2 seperate bulbs for blinking ang running, no?)

Back to Top

peter884

Member - Posts: 8

Joined: February 06, 2004

Location: Canada

Posted: March 29, 2004 at 11:16 AM / IP Logged

no because the power for both turn signal and running lights are on the same wire and i dont want to run a new wire when theres already one there

peter

Back to Top

popeye004

Copper - Posts: 97

Joined: March 08, 2004

Location: Canada

Posted: March 30, 2004 at 12:11 AM / IP Logged

why don't you pull your hand brake one knoch doesn't that work?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

neon daytime running lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.