enclosure volume

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / enclosure volume (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

satchmoe27

Member - Posts: 33

Joined: November 02, 2003

Location: United States

Posted: February 16, 2004 at 7:46 PM / IP Logged

I am about to build a fiberglass box in my nissan Altima and I was wondering if their was a way to pre-determine the volume of the enclosure. The sub that I am using works best with a sealed 1.0 cubic ft box. I measured the area that i wanted to use and it was 20" by 24".

screamon deamon

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: February 16, 2004 at 9:26 PM / IP Logged

you more or less take a guess at it to start......then after the foundation is glassed you can take a more accurate measurement. the easiest way is to kinda predend it is a square and see if you have the room.........then when you glass it...just glass a little more than you think you will need.......you can always cut it down or add to it if you need to.

S.I.Autosports

Copper - Posts: 98

Joined: September 30, 2003

Location: United States

Posted: February 17, 2004 at 4:51 AM / IP Logged

What shape do you plan on making the enclosure?

Search for other posts by S.I.Autosports

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

enclosure volume

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.