1991 Mazda MPV doorlocks?

Home / the12volt's Install Bay / Car Security and Convenience / 1991 Mazda MPV doorlocks? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: February 17, 2004 at 7:42 AM / IP Logged

I asked before, but never really got a solid response. above vehicle, has the single wire doorlock system...cut the wire to unlock, neg pulse to lock (I know that much!). The wire shows GREEN / WHITE at the module under passenger dash, which I found. However, it does not work!! It is definitely the doorlock wire, cause it reads as I manually actuate them....pulsing ground will lock them (sometimes), but cutting the wire does nothing. One side of the cut shows resting at nothing, the other side shows + voltage bleeding at about 5 volts...

any ideas? is there another wire I can grab in this vehicle? anybody with experience on this one?

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: February 17, 2004 at 10:32 AM / IP Logged

Grren/black & GREEN / WHITE in the DKP negative trigger

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: February 17, 2004 at 10:35 AM / IP Logged

whoops thats on the 92 MPV...but it may be the same

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 17, 2004 at 11:31 AM / IP Logged

One of my installation notes tell me that you need a 4.7kohm resistor on the unlock wire. as well.The wire is a GREEN/ BLACK at the DKP

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: February 17, 2004 at 11:48 AM / IP Logged

interesting, cause all my sheets say GREEN / WHITE at the module on pass side dash (which it is). I can find no GREEN/ black wire that has anything to do with the doorlocks on the dkp. Interesting about the unock wire and the resistor....can you pass me the sheet you have with that info?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 17, 2004 at 11:51 AM / IP Logged

Shoot me your email to: velocity@valleycable.com

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: February 17, 2004 at 1:52 PM / IP Logged

here is what i have:

Make: Mazda

Model: MPV

Year: 1991

Power Lock GREEN / WHITE AT DOOR LOCK TIMER #206

Power Unlock SINGLE WIRE SYSTEM BEHIND GLOVE BOX *

* Single Wire Door Lock System, Use Single Relay. Cut GREEN / WHITE- Switch Side To Pin #87A, Motor Side And Negative Unlock Output From Alarm To Pin #30. Negative Lock Output From Alarm Goes To Pin #85, 12 VDC (+) Constant Goes To Pin #86. Pin #87 Not Used. #206- See Single Wire Door Lock Diagram.

http://www.wiringinstructions.com/206.htm

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1991 Mazda MPV doorlocks?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.