the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Bose amp wiring diagram?


Post ReplyPost New Topic
< Prev Topic Next Topic >
ultimate1502 
Member - Posts: 19
Member spacespace
Joined: November 21, 2003
Location: United States
Posted: February 17, 2004 at 10:07 AM / IP Logged  
Where can I find one? It's in a 2003 Chevy Silverado SS. Thanks in advance...
ultimate electronics #1502
oak park, ks
bradsyukno 
Copper - Posts: 54
Copper spacespace
Joined: February 16, 2004
Location: United States
Posted: February 17, 2004 at 11:17 AM / IP Logged  
I have been looking for a Bose Amp wiring diagram for a 2003 GMC Yukon and have had no luck.  What you trying to do with it?
Mr Hexed
hotwaterwizard 
Silver - Posts: 1,350
Silver spacespace
Joined: December 11, 2003
Location: California, United States
Posted: February 17, 2004 at 4:21 PM / IP Logged  

Try this link.

http://forums.audiworld.com/tt/msgs/63697.phtml

John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !
hotwaterwizard 
Silver - Posts: 1,350
Silver spacespace
Joined: December 11, 2003
Location: California, United States
Posted: February 17, 2004 at 4:27 PM / IP Logged  

Try this link too!

http://carstereohelp.net/gotquestions.htm

John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !
bradsyukno 
Copper - Posts: 54
Copper spacespace
Joined: February 16, 2004
Location: United States
Posted: February 17, 2004 at 4:39 PM / IP Logged  
This helps, are you getting this ultimate 1052?
Mr Hexed
bradsyukno 
Copper - Posts: 54
Copper spacespace
Joined: February 16, 2004
Location: United States
Posted: February 17, 2004 at 4:46 PM / IP Logged  
I guess if you want to put your own amp in the car you would need to bypass the Bose Amp, replace the Bose speakers,  and you should be ok after that?  I have been told you can hook an after market amp up to those Bose speakers bypassing the Bose amp.  This is frustrating...
Mr Hexed
jeffchilcott 
Platinum - Posts: 2,496
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: February 17, 2004 at 5:30 PM / IP Logged  
The best options on these is the get the wiring harness and run all new wires from the amp to the spekers, not use the stock wiring
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
ultimate1502 
Member - Posts: 19
Member spacespace
Joined: November 21, 2003
Location: United States
Posted: February 17, 2004 at 8:15 PM / IP Logged  
Basically what 'im doing is adding line level convertors. I am adding an Alpine MRV540 and an Alpine MRD500, running all new wire, adding 3 way components up front , and a single 12 under the rear seat. I have the Bose in dash 6 disc and don't want to lose my steering wheel controls, xm and onstar at the moment. I just wanted to make sure I tagged the right wires. Thanks for all the help.....posted_image
ultimate electronics #1502
oak park, ks
bradsyukno 
Copper - Posts: 54
Copper spacespace
Joined: February 16, 2004
Location: United States
Posted: February 18, 2004 at 10:03 AM / IP Logged  

What speakers are you using for your Mids?  Do you currently have Bose speakers in there now?  I am trying to avoid spending a butt load of money buying new Mids/Highs, and wire my bose speakers to my own amp. 

Mr Hexed
hotwaterwizard 
Silver - Posts: 1,350
Silver spacespace
Joined: December 11, 2003
Location: California, United States
Posted: February 18, 2004 at 5:22 PM / IP Logged  
Did the link help anyone?
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, September 24, 2017 • Copyright © 1999-2017 the12volt.com Donate to the12volt.com Advertising Top of Page
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Donate to the12volt.com
Top
the12volt.com spacer
the12volt.com spacer