viper 150 HF remote start-Need help

Home / the12volt's Install Bay / Car Security and Convenience / viper 150 HF remote start-Need help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Duston

Member - Posts: 42

Joined: March 08, 2003

Location: Iowa, United States

Posted: February 17, 2004 at 10:46 AM / IP Logged

Any body have a wiring diagram for this unit? Viper 150 HF or could you let me know how to set the tach input wire.. I have a 2001 dodge dakota, every thing works locks, lights, it starts but the starter keeps on turning. Checked all wire colors and it seems that it is all ok. Any ideas ? let me know , thanks.

Factory security systems suck!

Back to Top

plywood

Member - Posts: 34

Joined: July 31, 2003

Location: United States

Posted: February 17, 2004 at 11:25 AM / IP Logged

One my guys had this problem about a week ago. On that one he made a mistake on the start wire and hooked it up to a ingition out put from the alarm. I don't think that it is a problem with your tach, because I'm pretty sure that all DEI product will crank the starter for only 6 seconds at the most. But to answer your question to program the tach, Start the vechile and hold the push button untill you see the red LED light constant then let go.

Matt

Always remember to test wires with a Digital Multimeter!

Back to Top

Duston

Member - Posts: 42

Joined: March 08, 2003

Location: Iowa, United States

Posted: February 17, 2004 at 11:46 AM / IP Logged

I think your right on the start wire, because it should'nt keep turning over usually the start wire will stop and start again if it did'nt get a proper tach signal. Brain fart or something. On those remote starters it shows the manual on the back and thats what i went off of, and the plug that the start wires are they are not in the order that it shows like the other main plug. red, red, yellow, violet, pink.. Its printed the other way pink, violet, yellow, red ,red.. I'll try switching the start and acc. wires this weekend. thanks again...

Factory security systems suck!

Back to Top

plywood

Member - Posts: 34

Joined: July 31, 2003

Location: United States

Posted: February 17, 2004 at 2:27 PM / IP Logged

By the way, NICE QUOTE!

I like it.

Matt

Always remember to test wires with a Digital Multimeter!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 150 HF remote start-Need help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.