the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

toyota 2004


Post ReplyPost New Topic
< Prev Topic Next Topic >
Power 
Member - Posts: 16
Member spacespace
Joined: June 06, 2002
Location: United States
Posted: February 22, 2004 at 4:47 PM / IP Logged  
i want to know if you got any information of wire diagram for the toyota tundra 2004
mass
diabloed 
Copper - Posts: 133
Copper spacespace
Joined: August 25, 2002
Location: United States
Posted: February 23, 2004 at 3:09 AM / IP Logged  
WIRING INFORMATION - TOYOTA / TUNDRA / 2004 / Remote Start
12volts white (40A), WHITE/ red (30A)   +   ignition harness
Starter grn/blk (V6), blk/wht (V8)   +   ignition harness
Ignition BLACK/ red   +   ignition harness
Second Ignition BLACK / YELLOW   +   ignition harness
Accessory blue/red   +   ignition harness
Keysense pink/black   -   ignition harness or plug below fuses
Notes: Using the status output wire from the remote start to trigger this wire will disarm the alarm without unlocking the doors.
Power Lock WHITE/ green or GREEN/ black   -   driver kick or plug below fuses
Notes: Meter these wires while turning the key in the driver door key cylinder.
Power Unlock blue/red (double pulse)   -   driver kick or plug below fuses
Notes: Meter these wires while turning the key in the driver door key cylinder.
Can also use the passenger key cylinder wire for unlock, which only requires a single pulse. It is RED / yellow or RED / white in the passenger kick or the plug below the fuses.
Parking Lights+ green   +   driver kick, harness to rear
Parking Lights- RED / black   -   headlight switch or plug below fuses
Door Trigger WHITE/ blue   -   driver kick, door harness
Dome Supervision use door trigger wire       
Factory Alarm Arm arms with lock       
Factory Alarm Disarm disarms with unlock       
Disarm No Unlock use key sense wire       
Tachometer black (V6), blue/white (V8)   ac   igniter (V6), ECM (V8)
Notes: On the V6 models, the igniter is on the passenger fender.
On the V8 models, the ECM is behind the glove box. The tach wire is in the far right plug, pin 5.
Brake Wire GREEN / WHITE   +   brake pedal switch
Horn Trigger GREEN/ red   -   column or plug below fuses
diabloed 
Copper - Posts: 133
Copper spacespace
Joined: August 25, 2002
Location: United States
Posted: February 23, 2004 at 3:12 AM / IP Logged  
WIRING INFORMATION - TOYOTA / TUNDRA DOUBLE CAB / 2004 / Remote Start
12volts wht/blu (40A), wht/red (25A)   +   ignition harness
Starter BLACK/ white   +   ignition harness
Ignition BLACK/ red   +   ignition harness
Second Ignition BLACK / YELLOW   +   ignition harness
Accessory pink   +   ignition harness
Keysense YELLOW /GREEN   -   ign harn or BECU, right plug, pin 22
Notes: Using the status output wire from the remote start to trigger this wire will disarm the alarm without unlocking the doors.
The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Power Lock see DirectFax document 1070       
Notes: The door lock wire colors are the same as those listed for the Sequoia on DirectFax document 1070.
Power Unlock see power lock notes       
Lock Motor blue/red   5wi DKP or BECU, right plug, pin 1
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Unlock Motor RED / black   5wi DKP or BECU, right plug, pin 14
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Parking Lights+ green   +   driver kick, harness to rear
Parking Lights- green   -   switch or BECU, left plug, pin 14
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Door Trigger blue/black   -   ignition key cylinder illumination
Notes: Can also use individual door trigger wires at the BECU. The LF door is gray/red, middle plug, pin 15. The RF door is lt. GREEN/ black, right plug, pin 8. The LR door is RED / white, middle plug, pin 16. The RR door is RED / white, right plug, pin 4. Use all four wires and diode isolate each.
The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Dome Supervision comes on with unlock       
Hood Pin blue/white   -   pin sw. or BECU, left plug, pin 5
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Factory Alarm Arm arms with lock       
Factory Alarm Disarm disarms with unlock       
Disarm No Unlock use key sense wire       
Tachometer WHITE/ blue   ac   ECM, right plug, pin 5
Notes: The ECM (Engine Control Module) is behind the glove box.
Brake Wire GREEN / WHITE   +   brake pedal switch
Horn Trigger BLACK / YELLOW   -   column or BECU, right plug, pin 21
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer