dei 555p

Home / the12volt's Install Bay / Car Security and Convenience / dei 555p (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

quicsilvr3

Member - Posts: 3

Joined: February 22, 2004

Location: United States

Posted: February 22, 2004 at 7:20 PM / IP Logged

I'm installing a remote start alarm in a 2004 Lincoln Navigator and I'm using the dei 555p and I can't get it to program to the vehicle keys. I've wired everything up properly but I'm not sure what the function of the remote start status wire is. The diagram states (-) remote start input... blue wire. Any help is appreciated.

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: February 22, 2004 at 7:30 PM / IP Logged

if I'm not mistaken that unit will not work on that car (555P) you need to use a valet key and use the 555U

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: February 22, 2004 at 8:54 PM / IP Logged

The 555P won't work with that truck. A PKU-F2 from bypasskit.com will work, or you will have to give up one of your keys.

Hardcor audio

Member - Posts: 8

Joined: February 22, 2004

Location: United States

Posted: February 22, 2004 at 9:07 PM / IP Logged

The 555p will not work on Ford vehicals that have securelock, securelock requires the dei 555u which a key needs to be put inside of it, the 555p will work on the ford vehicals that have the pats security.

----------------------------------------------------------------------------------------------------------

also if you have never installed an alarm or remote starter i suggest that you let a car audio store do this for you

Hardcor audio

Member - Posts: 8

Joined: February 22, 2004

Location: United States

Posted: February 22, 2004 at 9:09 PM / IP Logged

The 555p will not work on fords with securelock, the 555u will have to be used which requires a key, the 555p only works on the pats systems

JMaxx93

Copper - Posts: 73

Joined: December 02, 2003

Location: United States

Posted: February 22, 2004 at 9:22 PM / IP Logged

as far as the blue wire. connect it to a wire from the alarm that has a negative polarity when remote starting. a.k.a. status output wire. wire is usually blue/black on dei and dei clones.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 555p

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.