97 Tacoma keyless pinout

Home / the12volt's Install Bay / Car Security and Convenience / 97 Tacoma keyless pinout (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wcurtis

Member - Posts: 1

Joined: February 23, 2004

Location: United States

Posted: February 23, 2004 at 5:50 PM / IP Logged

Does anyone know about the TDS system in Toyota's? I am trying to intergrate a remote starter into my keyless entry system but need some info on it.

It is marked "main module part number 00016-30960-01"

Any help would be helpful.

Thanks,

Bill

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 23, 2004 at 8:41 PM / IP Logged

Dont know about that but, here is a wiring diagram.

Toyota

Tacoma

1996-2002

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK	IGNITION SWITCH HARNESS
Ignition #1:	BLACK/ RED	IGNITION SWITCH HARNESS
Ignition #2:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	BLUE/RED	IGNITION SWITCH HARNESS
Brake Light:	GREEN / WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	BLACK	AT IGNITER ON PASSENGER WHEELWELL *
Parking Lights:	GREEN (+)	# PIN GRAY CONN. AT FUSE BLOCK **
Headlights:	RED / BLUE (-)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:	N/A	IN SCHEAMTICS
OEM Alarm Arm:	N/A	NO OEM ALARM PRESENT
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* BLACK Tach Wire Also Located In 26 Pin Connector Behind Glove Box.

Toyota

Tacoma

1996-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE/ RED & WHITE	IGNITION SWITCH HARNESS
Starter Kill:	BLACK	IGNITION SWITCH HARNESS
Ignition +12 Volts:	BLACK/ RED	IGNITION SWITCH HARNESS
Dome Lights/Superv:	BLACK/ WHITE (-)	2 PIN GRAY CONN. AT FUSE BLOCK **
OEM Horn:	GREEN/ RED (-)	STEERING COLUMN HARNESS
Power Lock:	RED / WHITE	# PIN CONN. IN DRIVER'S KICK ***
Power Unlock:	RED / YELLOW	# PIN CONN. IN DRIVER'S KICK ***
Trunk Release:	N/A
Alarm Input Wire:	BLACK/ WHITE (-)	2 PIN GRAY CONN. AT FUSE BLOCK **
Notes:	Fuse Block Located In Driver Kick Panel. * Child Safety Locks: RED / BLUE (-) In Same Connector As Door Lock Wires Above. See Note #209 - Toyota Child Safety Door Lock Diagram.

Back to Top

Rmeyer

Member - Posts: 13

Joined: February 24, 2004

Location: United States

Posted: February 24, 2004 at 11:14 PM / IP Logged

toyota pickup factory alarm does not offer a trunk release output . if it was a car you could use a car start add on and delete the truck pop and use that signal to send to the carstart input wire

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: February 25, 2004 at 9:00 AM / IP Logged

we need more info on your remote system

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 Tacoma keyless pinout

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.