Interior Motion Sensor placement

Hey all, I have a 98 jeep grand cherokee. I am installing a microwave motion detector on a crimeguard 745i and it recommends placement in the center console. The only bad thing is there really is no good place for it there. I was thinking of mounting it on the upper temp/compass console on the roof. Would this affect performance pointing downward instead of up? I was going to try it but I have to extend the wiring in order to run it up the windshield pillars and to the overhead console. Thanks in advance!! Tim-May!

You can install it in the center all you have to do is take out the center console. Just remove the 2 screws in the front of the console and then the 4 in the compartment. I placed mine by the ebrake  cable and it works great"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

I know exactly where you are talking about. It is supposed to be nice out, so I am going to try and get it done today. Thanks for the response! TimTim-May!