creating an aux output?

Home / the12volt's Install Bay / Car Security and Convenience / creating an aux output? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dmangru01

Member - Posts: 19

Joined: January 24, 2004

Location: United States

Posted: February 29, 2004 at 6:28 PM / IP Logged

My alarm does not have an aux output that is activated when the alarm is armed. I would like to hook up a window roll up module so that when the alarm is armed the windows will roll up also. Could I tap into a wire to give a signal when the alarm is armed? If so, which? (I was thinking the wire that goes to the relay for the starter kill?)

thankx

Back to Top

bassop823

Copper - Posts: 64

Joined: December 15, 2003

Location: United States

Posted: February 29, 2004 at 8:55 PM / IP Logged

I just done a 530t on a dei alarm and the wire I used for my ground was the starter kill and everything worked fine. I beleive that is what most of the guys are using for the 530t.

bassop

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

creating an aux output?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.