96 ford explorer factory gone crazy

Home / the12volt's Install Bay / Car Security and Convenience / 96 ford explorer factory gone crazy (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: March 02, 2004 at 5:17 PM / IP Logged

I have a customer that camne in with a factory remote that does not disarm the alarm but only unlocks the door,he says the alarm stops sounding when he turns his key on. Now he says this happened after he disconnected his battery to clear a check engine light he had. Any ideas on how i cvan try and reprogram this thing and see if it gets better??????

Back to Top

Search for other posts by mobiletoys2002

jfk51502003

Copper - Posts: 221

Joined: March 04, 2004

Location: United States

Posted: March 05, 2004 at 3:32 PM / IP Logged

what kind of car?????

Back to Top

daniel2002p

Silver - Posts: 524

Joined: October 10, 2003

Location: United States

Posted: March 05, 2004 at 9:54 PM / IP Logged

jfk51502003 it is a 96 ford explorer, as stated in the subject line, as far as fixing that, had the sme thing happen, have to reprogram remote, do not know how to do it, but the local dealership did it for free for our cust.

2005 Toyota Corolla S

1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 05, 2004 at 10:04 PM / IP Logged

To program a 1996 Ford OEM remote FOB:

1.Insert the keys in the ignition and turn the ignition switch from OFF to RUN, five times within ten seconds, ending in RUN. If the vehicle has successfully entered the program mode, it will lock and then unlock all doors automatically.
2.Press ANY button on a keyless entry remote transmitter and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated. NOTE: When the first keyless entry remote transmitter is programmed, all existing keyless entry remote transmitters are erased.
3. Repeat the previous step for each transmitter that will operate the vehicle.
4.If the door locks do not respond for any keyless entry remote transmitter, wait 10 seconds and press the button again

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 ford explorer factory gone crazy

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.