Alpine swr-1041 Type R

Home / the12volt's Install Bay / Car Audio / Alpine swr-1041 Type R (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

9707959

Member - Posts: 15

Joined: September 28, 2003

Posted: March 04, 2004 at 10:08 PM / IP Logged

I want to run a 1200 watt mono class d amp to these subs. I will have them wired down to 1 ohm so they will get 600watt rms to each of them. Alpine recomends 300rms max but the max power is 1000watts. Will running twice the recommended rms power (600) be bad for the subs. I have heard that these subs can take some power though.

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: March 04, 2004 at 10:42 PM / IP Logged

if it is a good clean amp you should be fine, the life may be shortened on the subs a little bit but those subs can definately take some power. i put 500wrms to each of mine and it sounded great with out any distortion.

Quad L Handyman services

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine swr-1041 Type R

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.