memphis mc1000d

Home / the12volt's Install Bay / Car Audio / memphis mc1000d (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

97neon

Copper - Posts: 195

Joined: June 08, 2003

Location: Canada

Posted: March 05, 2004 at 2:28 PM / IP Logged

hey guys, i have 2 memphis 1000d amps, one is made in 20003 and one is made in 2004, they are both mc1000d's, will it matter if there made in a different year if i hook them up together???

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: March 05, 2004 at 2:37 PM / IP Logged

Probably not, they should be the same, but hook them up together = bad idea, use both = good idea.

Top Secret, I can tell you but then my wife will kill me.

ksin291

Copper - Posts: 114

Joined: December 31, 2003

Location: United States

Posted: March 05, 2004 at 3:03 PM / IP Logged

You can use the 16-MC1000D's in bridged pairs, you must buy the bridging module from memphis and the amps can't be used with less than a 2 ohm load. The fact that they are from different years does not matter the only change that memphis made to the amps from 2002 and 2003 is the exterior "gun metal" finish, the guts of the amps are the same.

97neon

Copper - Posts: 195

Joined: June 08, 2003

Location: Canada

Posted: March 05, 2004 at 3:31 PM / IP Logged

what if i just hook 1 amp up to each voice coil, the sub is dual 2 ohm, so if i put one on each side would that be the best thing to do????

ksin291

Copper - Posts: 114

Joined: December 31, 2003

Location: United States

Posted: March 05, 2004 at 3:39 PM / IP Logged

Here's a link to the bridgin module and how it works:

http://www.memphiscaraudio.com/public/16-BRIDGE%20Wiring%20Diagram.pdf

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

memphis mc1000d

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.