Autopage 850lcd, 92 Bonneville

Home / the12volt's Install Bay / Car Security and Convenience / Autopage 850lcd, 92 Bonneville (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jeffbayne

Member - Posts: 6

Joined: March 08, 2004

Location: United States

Posted: March 08, 2004 at 11:33 PM / IP Logged

Hey guys, this coming weekend i'll be putting an 850 in my bonneville. I have the VATS chip in my key, and have a Designtech module for that. I've gotten the wire diagrams off of here. Anything special I need to know??? Any heads up about this alarm, or the car?

Thanks guys!

jeff

ECD 416~*~5061~*~Kimber Select~*~DAC 348~*~PA2~*~XM3~*~202m~*~160-03kx~*~NX-30~*~DDC-R17F~*~ZR600~*~88120dvc~*~Zeronoise~*~Yellowtop

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 08, 2004 at 11:46 PM / IP Logged

Is this for the SSE or SSEI or a lower model ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

JakeJ

Member - Posts: 38

Joined: February 22, 2004

Location: United States

Posted: March 08, 2004 at 11:48 PM / IP Logged

I am not familiar with the alarm but the vats bypass should be a snap. Good luck this weekend!

Wyoming 12volt Enthusiast

Back to Top

jeffbayne

Member - Posts: 6

Joined: March 08, 2004

Location: United States

Posted: March 09, 2004 at 1:29 AM / IP Logged

base model SE. not supercharged.

ECD 416~*~5061~*~Kimber Select~*~DAC 348~*~PA2~*~XM3~*~202m~*~160-03kx~*~NX-30~*~DDC-R17F~*~ZR600~*~88120dvc~*~Zeronoise~*~Yellowtop

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 09, 2004 at 8:41 AM / IP Logged

(+) Type door lock system : If your system does not have alternating polarity door locks, then you need relays to convert the signal of the (-) to a (+), use this diagram.

OEM Alarm Disarm : Wire is located in the dirver's kick panel and is light green in color. Will test (-) when unlocked.

Tachomeetr Wire : This wire is PURPLE / WHITE and is located at the ignition module or a WHITE wire the instrument cluster on models with a tachometer

VATS bypass: You can either buy a module to install which will autodetect the resistor value and save you time or you can measure the chip in the key and use this diagram for a home built module.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Autopage 850lcd, 92 Bonneville

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.