Need help with Viper 550ESP remote start

instalher wrote: have you checked your ground, i just had the same problem with a 98 safari van, my ground was screwed in tight but when i put my meter in the molex at the brain i only had 10 volts!! i changed the ground and the buzzing stopped and she worked like a hot damn.

Am I supposed to check the ground for the remote start or all the grounds for the alarm? To check the ground I connect the ground and a power right.

I got the remote start to work partially. It would start the car but it likes there isn't enough power or something because it doesn't really want to start up. It takes a little longer and it sounds funny when it starts. I recheked all the wiring and it seems all fine. i redid a couple of the wires that why its partially working but it feels like it doesn't want to start, like there's not enough power or something. What could it be?

what kind of car and what year as well as what wire are you connected to Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Its a 98 Accord Coupe 4cyl. What do you mean what wires are connected? All the remote start wires are connected. It seems like the engine is cranking too fast or something. It starts but it cranks like 4-5 times before it acutally starts and the cranking doesn't sound that good.

Anyone know why it doesn't want to start. The car cranks a lot and will sometimes start but not all the time. What else should I check? I replaced the relay already so it not the relay and the wiring looks and seems to measure at the right voltage.