amps

 i need a good amp, that will power 4 12 in cerwin vega v- max subs.dvc 800w  max power. i have boughten sony amps for so long that i got no idea anymore. so suggestions would help thanks.southsider

 also i want it to be a mono amp too.southsider

you wanna a mono amp to power 4 12"s?

A Rockford 1501BD would be a good amp for this application. 1500 w x 1 rms @ 2ohm mono, the exact load that 4 dvc 4 ohm subs wired in a series / parallel circuit will present.Top Secret, I can tell you but then my wife will kill me.

or at least something that make my sh*t go boom. so any suggestions would be helpful.southsider

The box is what will make the bite, not just the amp.Top Secret, I can tell you but then my wife will kill me.

so that rockford bd if i run those subs in paralell will break that ohm load down to two?southsider

so i will need one or two of those amps forbidden? an thank u for your advice i really appreciate it.southsider

would this amp work because ROCKFORD FOSGATE

2000 WATT RMS SUBWOOFER AMPLIFIERi think there switching over to these nowsouthsider

Link won't post for me. Anyways, your subs if they are dual 4 ohm voice coils can each be wired in series to create a single 8 ohm load for each sub. Then all 4 subs wired in parallel create a 2 ohm mono load. Rockford amps 99% of the time make more power than they claim, I would expect this amp to produce closer to 1700 watts rms @ 2 ohm mono (the 1501bd that is). If the link you posted is for the T20001bd then that amp will work just fine as well. Top Secret, I can tell you but then my wife will kill me.