rsx 3.5 questions

Home / the12volt's Install Bay / Car Security and Convenience / rsx 3.5 questions (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Duke70301

Member - Posts: 19

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 18, 2004

Location: United States

Posted: March 18, 2004 at 3:30 PM / IP Logged

I just had my clifford rsx 3.5 installed yesterday...in my 2002 denali....we came across two ignition wires for the remote start when started the pink wirk has no volts......we just capped it and did not connect it to anything..the car starts but we are haveing problems.. the lcd when unlocked will read that it has been triggered.. and the led lights stays blinking twice...and i cant program the other remote...can this have something to do with that pink heavy gauge wire diconected......any help appricated......thanx

Duke70301

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 18, 2004 at 3:39 PM / IP Logged

please any help

Duke70301

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 18, 2004 at 3:59 PM / IP Logged

ttt

Duke70301

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 18, 2004 at 4:45 PM / IP Logged

any one can help?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 18, 2004 at 4:53 PM / IP Logged

here is what i have...double check the wires...

Make: GMC

Model: Yukon

Year: 2002

Alarm

Constant 12 volts RED IGNITION SWITCH HARNESS

Ignition 12 volts PINK IGNITION SWITCH HARNESS

Starter YELLOW IGNITION SWITCH HARNESS

Dome Light PURPLE LIGHT SWITCH HARNESS

Trunk Pin Switch

Parking Lamp BROWN (+) LT. BLUE PLUG AT BCM *

Power Lock L BLUE ON BCM AT BASE OF #202

Power Unlock WHITE STEERING COLUMN

#202 - See Positive Pulse Door Lock Diagram. * BCM Is Located Behind The Driver's Side Dash.

Remote Start

Tach Signal WHITE AT ECM * #238

Ignition #2 WHITE IGNITION SWITCH HARNESS

Ignition #3 ORANGE IGNITION SWITCH HARNESS

Accessory BROWN IGNITION SWITCH HARNESS

Neutral Safety NOT GROUNDING TYPE - OEM SWITCH OPENS STARTER CIRCUIT

Brake Light WHITE (+) AT SWITCH ABOVE BRAKE PEDAL

Reverse Light L GREEN (+) DRIVER'S DOOR SILL HARNESS

Rear Window Defrost N/A

#238 - See G.M. Passlock II Diagram. * ECM Is Located Near The Battery Under Black Cover.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Duke70301

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 18, 2004 at 5:18 PM / IP Logged

We did not use the pink heavy gauge wire on the harness because ....we already had an ignition wire....could this wire not being connected giving me problems

Duke70301

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 18, 2004 at 5:44 PM / IP Logged

Any one know the clifford are viper 791 alarms?

rudbwoy69camaro

Silver - Posts: 350

Joined: June 10, 2003

Location: United States

Posted: March 18, 2004 at 6:04 PM / IP Logged

Who installed it? Take it back I say.

Search for other posts by rudbwoy69camaro

Toru

Copper - Posts: 102

Joined: January 24, 2004

Posted: March 18, 2004 at 6:48 PM / IP Logged

Ok, the 2002 Denali has this:

Ignition #1: PINK (# AWG) IGNITION SWITCH HARNESS

Ignition #2: WHITE (# AWG) IGNITION SWITCH HARNESS(ECM)

And the Matrix RS3.5 has two ignition outputs (pink and pink/white).

Why wouldn't you connect both?

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: March 18, 2004 at 7:47 PM / IP Logged

Pink -> pink in car

Pink/white -> white in car

Problem solved

If the pink ignition wire on the 3.5 doesn't see ignition you won't get into programming, your starter kill won't work, you can't learn tach, you can't put it into valet using the valet button, and more. Hook it up.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.