Compustar installation

Home / the12volt's Install Bay / Car Security and Convenience / Compustar installation (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ammarsunfire

Member - Posts: 41

Joined: September 01, 2003

Location: Canada

Posted: March 18, 2004 at 5:55 PM / IP Logged

I'm installing a compustar 2 way fm remote starter on a 1998 dodge durango and i just have a few questions. I has a facctory keyless entry. On the vechicle information it shows that there is only a disarm wire, is the arm wire reverse polarity? Secondly are lock and unlock reverse polarity? and where can i find the door triggers?

Any help would be GREATLY apreciated

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 18, 2004 at 8:45 PM / IP Logged

Make: Dodge

Model: Durango

Year: 1998

Alarm

Constant 12 volts RED & PINK/BLACK IGNITION SWITCH HARNESS

Ignition 12 volts D BLUE IGNITION SWITCH HARNESS

Starter YELLOW IGNITION SWITCH HARNESS

Dome Light YELLOW (-) AT COURTESY LIGHT UNDER DASH

Trunk Pin Switch TAN/BLACK (-) 16 PIN CONN. BELOW FUSE BLOCK

Parking Lamp BLACK / YELLOW (+) AT HEADLIGHT SWITCH

Power Lock ORANGE / VIOLET 16 PIN CONNECTOR BELOW #203

Power Unlock PINK/VIOLET FUSE BLOCK IN DR. KICK PANEL

#203 - See Reversal Rest At Ground Door Lock Diagram.

Accessories

Window Up D\ L BLUE P\ BRN/WHT D\ BLU/WHT P\ GRY/BLK @ MAIN #211

Window Down F/ WHITE F/ PPL/WHT R/ RED / BLK R/ GRN/WHT SWITCH

Ign Key Warn L BLUE (-) IGNITION SWITCH HARNESS

Trunk Release N/A

OEM Horn BLACK/ RED (-) STEERING COLUMN HARNESS

Headlights L GREEN (+) AT HEADLIGHT SWITCH

OEM Alarm Arm N/A

OEM Alarm Disarm L GREEN/ ORANGE (-) 16 PIN CONN. BELOW FUSE BLOCK

#211- See Reversal Rest At Ground Power Window Circuit Diagram

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: March 18, 2004 at 8:55 PM / IP Logged

I hear those alarms are hard to install...let me know how it turns out for you. I can't wait to get to install one.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

ammarsunfire

Member - Posts: 41

Joined: September 01, 2003

Location: Canada

Posted: March 19, 2004 at 11:02 AM / IP Logged

Thanks for help, this is my second compustar installation.

frleal70

Member - Posts: 4

Joined: April 02, 2004

Posted: April 02, 2004 at 10:58 PM / IP Logged

Update? I'm tagging this one, because I would like to know how it turns out.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 03, 2004 at 11:22 AM / IP Logged

-hey ammarsunfire, did you have to program the LCD for it to function?

i recently installed a 2wss and have to program. i thought this was weird.

-the system is really easy, i think the wires setup are pretty organized for easy install. its just like another alarm.

-the only thing diff about it is design for M/T, you can clip off the loop inside the brain for A/T. if not its on for M/T and you have to wire the ebrake and have to go through the reserve mode process for remote start.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar installation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.