Rockfod Fosgate BDSync

Home / the12volt's Install Bay / Car Audio / Rockfod Fosgate BDSync (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: March 25, 2004 at 8:03 AM / IP Logged

I have to point out that when you use a bd sync cable on an a set of amps it makes the pair only stable to 4 ohms not 2. So if you wanna sync them make sure you can run 4 ohms. Ill check on the price of the cable and get back to you.

septicdeath

Copper - Posts: 60

Joined: February 13, 2004

Location: United States

Posted: March 25, 2004 at 10:28 AM / IP Logged

I know, I have my three 3112's wired to present a 3ohm load. I've been told that although this isn't 4ohm, its not a issue with the 500cfm of fan I am suppling and that its close enough, not like its wired at 1.34 ohms or anything... ;)

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rockfod Fosgate BDSync

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.