93 Buick Century Power Windows

HI Everyone!  I need some help from someone. I didnt find what I needed in the wiring section.  Here is my problem.  My right side power windows do not work.  I took off  the door trim and unhooked the connector.  I took a volt reading and came up with nothing.  I also ohmd it out and there was continuity between the two wires going to the window motor and also between the 5 other wires in the connector. I am assuming this is bad but am not sure.  I thought maybe I had a bad relay or module, but i dont know where to locate them to test them.  Can someone please help? Thank you very much.

Adam

    One of  your switches is not making a good connection and is not allowing either of the two switches to work

   I know this sounds weird but take out your switches and clean them with  carburator cleaner and re-install

   them .  Chances are that the connection points in the switches are corroded over and just need to be cleaned.

    I could be wrong -but it is an inexpensive first test and I tried this on a truck and it worked.

   Billy