Resetting 508D dual zone motion sensor

Home / the12volt's Install Bay / Car Security and Convenience / Resetting 508D dual zone motion sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

laren5

Copper - Posts: 57

Joined: June 10, 2003

Location: Aruba

Posted: April 01, 2004 at 2:41 AM / IP Logged

Does anybody have the info on how to adjust the 508D back to factory???

someone I know has been turning this factory adjust, instead of the two one intended for sensitivity adjust. Now the 508D does not trigger the alarm. The internal lights of the 508D wil light up, but does not trigger the alarm.

Can this be re-adjusted, or is it screwed up?

Pls let me know.

thank you

Clifford Alarms

laren5

Copper - Posts: 57

Joined: June 10, 2003

Location: Aruba

Posted: April 01, 2004 at 3:08 AM / IP Logged

Solution:

it works properly. The factory adjust was untouched, so msytery solved.

Thanks anyways

Clifford Alarms

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Resetting 508D dual zone motion sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.