Door Pods / Panels Project Started 4-1-04

looking good man, keep us posted untill finished.

http://www.villagephotos.com/viewpubimage.asp?id_=8561138

http://www.villagephotos.com/viewimage.asp?id_=8561209

http://www.villagephotos.com/viewimage.asp?id_=8561244

Here are some more images, I have had a few requests. I have been busy starting the glassing of my door panel. I have also been busy bondoing the **** out of those door pods which are coming out awesome. I will take more pictures of the door panel soon, I put a small layer on it today and had to flip it over and I couldn't get a picture. I am kinda stuck, I need to buy a dremel and some more sand paper. I should be getting paid here soon. If you know where to get a cheap dremel/rotozip with small s/h fees PM me or email me. Thanks for the comments.

I need a free image host, I can't find one that wants to work. Cardomain wasn't working for me. If you know one post it.

I found one that will work for now.

Heres a rough pic of my door panel in progress. 2-3 layers in spots.

i have a 93 accord 2 door.  I did my kick panels the same way, but they only stuck out an inch or less.  I mounted the speaker further toward the front of the door at an upward angle.  To do that I had to cut away the door skin to make room for the speaker magnet, and I re-located the bracket that stabilized the lower window track.  I painted them the color of my car, phantom gray, and they turned out very nice.  Any questions when doing yours, just ask.

be careful when putting the resin on, mine warped a little bit from the heat the resin creates.  It just made a little more work for me in the long run.