Wiring Alarm Relay Packs??

io have a question about wiring up relay packs for alarms for the various things you needthem forlike dome light, horn ,trunk realese etc..

i done a few alarms but my problem is wiring all these relays up and keeping it neat. most relays need an constant 12v  and a ground and it gets messy tieing all those wires together so i was wondering how you guys do it and keep it neat. any good trick or sites you have with some pics.

also is it  ok to wire the 12v constant and grounds to each realy in sireies form one relay to the next

thanks please let me know

I kind of had the same question in the Relays forum...I had asked if you could "piggyback" the relays...and it seems like if you do it on a small scale it's ok.  For example, if you have to have 2 wires from a relay going to 12v+, you can connect one to the other, and then that one to the 12v+....so only one wire needs to attach to the 12v+.  That's one sort of trick that I know of.  But I know what you mean...I have a relay for domelight, trunk, accessory, and so on....gets difficult to hide them with so many.

https://www.the12volt.com/installbay/display_topic_threads.asp?ForumID=5&TopicID=2524&PagePosition=1

so how many relays can i wire in series 

im going to have about 4 -5 relays ,dome,trunk,horn, starter kill, and maybe onw other not to sure yet

also anyone else  have any tips for keeping the realy and alram wireing neat under the dash

thanks

anyone have tips for keeping everything neat during  an alarm install with lots of relays????

please help

thanks

how do i know if it can handle the current. im porbabbly using about 4 realys like i said but not all will be used at once is this ok??

please let me know

thanks