Radio and windows on until door opened

I used this diagram and have it running through my accessory circuit.  Works great for my radio, but I didn't realize that my power windows won't work unless keys are in the "on" position.  Can I just use this same setup, but tap my "radio accessory wire" from the diagram into the "on" wire in my steering column?  I didn't know if that would be too much.  But I really want radio, windows and cig lighter to stay on untill the doors are open.  I guess my only other option is to tap into (and isolate) just the things I want on right?

Thanks

wait....I guess what you're talking about would power the whole circuit that the windows are on thus including the radio and cig lighter. Right?

OK,  I changed the connection from my radio acc wire to my ingnition 2 wire and now my windows work but not the radio.  Do I have to use 2 different setups (2 sets of 2 relays) to get this to work?  Could I split the "radio acc wire" coming off the relay and hook it up to my radio acc wire and my window wire at the fuse block?  In case you haven't figured it out already, I'm new at this, so please forgive my ignorance.

Also, since I changed connections my ABS light has come on a few times.  I think it happens after I shut off the car, roll up the windows then open the door (basically when I use the intended feature).  The next time I start the car, the ABS light comes on.  Doesn't seem to happen all the time.  If I shut off the car and restart it, the light goes away.  I don't know if it's coincidence or if it's a problem with tapping my ignition 2 wire.

TIA

Ty

I want to do this with my car but only want my windows and radio to do this. Not any other accessories. How would I do this? Thank you.

                                                                                                              Joe