Abs plastic 2

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Abs plastic 2 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

biznisman2u

Copper - Posts: 59

Joined: January 07, 2004

Location: United States

Posted: April 05, 2004 at 11:38 PM / IP Logged

Yes, I just bought 2 1 sq ft. of ABS plastics and i was wondering what tool do i use to bend it..... Is it best for me to get a heat gun or a torch, or a micro-therm butane powered heeat gun. or what.. what do any one suggest using to make crazy shapes out of this material like curve ends to fit a dash or something like that???/... and can u cut it with a jig saw.

Biznisman2u

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 06, 2004 at 1:20 AM / IP Logged

Use a heat gun to bend and use a mini recipricator to cut the shape.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

biznisman2u

Copper - Posts: 59

Joined: January 07, 2004

Location: United States

Posted: April 06, 2004 at 10:21 AM / IP Logged

i've looked in parts express. should i use a mini heat gun or one of those big circle heat guns used for floor mats in construction work........and what is a mini recipricator where can i buy that from and how is it different from a razor cutter... i also wont to know how do i paste these pieces together. in a car and auto mag. they said they super'glued it together. is this good. or should i someway melt the ends together

Biznisman2u

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Abs plastic 2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.