Vinyl on Mdf

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Vinyl on Mdf (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: April 19, 2004 at 11:18 AM / IP Logged

also remember, if two peices oif vinyl have to meet at a seam, make sure it's on a flat surface, if you cut it to seam at a corner, the thickness of the vinyl will show and suck. You can use a razor blade to cut the two peices to the same shape and have them pushed together. You can make it look seamless

Back to Top

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: April 19, 2004 at 7:50 PM / IP Logged

I've never really understood this. If you were to wrap a rectangular box in vinyl, wouldnt there have to be overlapping parts coming from the corners? How so u prevent this?

dream it, build it, fiberglass it

Back to Top

mycustoms1980

Member - Posts: 10

Joined: April 21, 2004

Location: United States

Posted: April 21, 2004 at 10:39 PM / IP Logged

dam the spray glue use contact cement u can get it at napa and yes it is a form of spray adhesive ( i tried spay glue it dosent last as long ) the pros use the cement for auto upholstery..........good luck with the project

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: April 22, 2004 at 5:48 AM / IP Logged

Has anybody ever tried the 3M #80? It is specifically for rubber and vinyl.. I saw it last time I was at the home depot but haven't had a reason to buy any yet. I would think this is your best choice for applying vinyl.

Mike

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Vinyl on Mdf

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.