multimeter leads

Home / the12volt's Install Bay / Car Security and Convenience / multimeter leads (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

naughtydog

Copper - Posts: 90

Joined: May 02, 2002

Location: United Kingdom

Posted: April 16, 2004 at 6:05 PM / IP Logged

I am looking for multimeter leads that allow you to probe the wire easily. Here is a link to an image from the dei techbay

here is the link

Can anybody enlighten me

Naughtydog

Back to Top

mikep3

Member - Posts: 26

Joined: January 07, 2004

Posted: April 16, 2004 at 6:41 PM / IP Logged

Those look like scope probe leads. I'm not sure if they make them to fit into a multimeter but they might. Check your local electronics shop. Usually the ends of those are bnc connectors. You could probably make your own if you wanted.

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: April 16, 2004 at 9:40 PM / IP Logged

Tools trucks will have them.

A similar one that works very good is often called a 'bed of nails'.

You could try doing a google search on 'Pomona Electronics'. Its stamped on the probe you linked to.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

multimeter leads

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.