Engine Starter for Honda Accord 91

Hi Everyone

I just got Prostart CT-3300 Remote starter for my Honda Accord 1991, I am having problem, after all wiring the engine is not starting, instead it is give 5 paking lights flashes, does any body have complete wiring diagram, and also i need to know about Tach wire, where i have to connect it in engine (please give complete details), also where are the OEM alarm Disarm wire located ?

thanks for help

Javed

amjadbokhari@msn.com

Thanks But i did program it, because remote door locks are working

[QUOTE=chasesaccessori]Try this maybe

Thanks, but same diagram

locks work because you coded the remote to the module.

5 flashes when you press start: tach not programmed to the module. <- this is how the module 'knows' the vehicle has started, and when to relase the start wire during a start attempt. Were you hoping the module would just know when your vehicle was started ? read > 

from the prostart.ca web site:

page 5  in the gray note box.

http://206.47.191.115/assemblyPDF.nsf/view-AllPDF/CT-3300_ig_en_h310s320v200_040312.pdf/$file/CT-3300_ig_en_h310s320v200_040312.pdf?openelement

run the purple wire from your alarm to the engine compartment and hook it to the blue wire coming out of your distributor cap. without this wire being hooked up your remote start will never start....no matter what

if its jammed force it - if it breaks in the process it needed to be fixed anyway