Reprogramming remote on my Ungo MS3001

Home / the12volt's Install Bay / Car Security and Convenience / Reprogramming remote on my Ungo MS3001 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Don Chi Chi

Member - Posts: 3

Joined: August 26, 2002

Location: Canada

Posted: August 26, 2002 at 11:26 AM / IP Logged

Can anyone fill me in on how to program my remote on my Ungo alarm? I erased it.

Back to Top

enuro12

Copper - Posts: 31

Joined: July 24, 2002

Location: United States

Posted: August 26, 2002 at 12:56 PM / IP Logged

A model # would be a great help......

Chuck,

tech junky

Back to Top

Don Chi Chi

Member - Posts: 3

Joined: August 26, 2002

Location: Canada

Posted: August 26, 2002 at 4:40 PM / IP Logged

Hi.

What other model # is needed? I stated it was a MS3001 in the subject, is there something else to denote the model?

Back to Top

hot_shot_guy123

Copper - Posts: 114

Joined: March 09, 2002

Location: Canada

Posted: August 26, 2002 at 6:01 PM / IP Logged

Um I have had UNGO alarms but not that one. To program the remote was the same way for every UNGO that I owned. Put the ignition key in the "ON" position, Hold the Valet switch. While holding the valet switch press and hold the "ARM" button. After a few seconds you should hear three chirps indicating that the remote has been added. Give this a shot and let me know the outcome.

"Light travels faster then sound, that's why some people seem bright until you hear them speak."

hot_shot_guy123

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Reprogramming remote on my Ungo MS3001

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.